CDM 750/1250/1550 Maxtrac ETC: Difference between revisions
From Treasure Valley Repeater Group
Jump to navigationJump to search
(Created page with "This cable will require you to have a RJ45 to DB25 female adapter as pictured below: You can find these on ebay by searching for DB25 RJ45. You will also need a short piece of 24 gauge wire to crimp two female pins to that need to go between pin 4 and pin 11 on the rib connector. {| class="wikitable" |+ !RJ45 Jack Color !DB25 !Signal |- |Green |1 |Ground |- |Orange |15 |BUS+ |- |White |12 |A+ |- |Black |25 |Boot Control |}") |
No edit summary |
||
| Line 1: | Line 1: | ||
This cable will require you to have a RJ45 to DB25 female adapter as pictured below: | This cable will require you to have a RJ45 to DB25 female adapter as pictured below: | ||
[[File:Rj45 db25.jpg|none|thumb]] | |||
You can find these on ebay by searching for DB25 RJ45. | You can find these on ebay by searching for DB25 RJ45. | ||
Latest revision as of 17:56, 31 December 2023
This cable will require you to have a RJ45 to DB25 female adapter as pictured below:
You can find these on ebay by searching for DB25 RJ45.
You will also need a short piece of 24 gauge wire to crimp two female pins to that need to go between pin 4 and pin 11 on the rib connector.
| RJ45 Jack Color | DB25 | Signal |
|---|---|---|
| Green | 1 | Ground |
| Orange | 15 | BUS+ |
| White | 12 | A+ |
| Black | 25 | Boot Control |
