CDM 750/1250/1550 Maxtrac ETC

From Treasure Valley Repeater Group
Revision as of 17:53, 31 December 2023 by Dwisdom (talk | contribs) (Created page with "This cable will require you to have a RJ45 to DB25 female adapter as pictured below: You can find these on ebay by searching for DB25 RJ45. You will also need a short piece of 24 gauge wire to crimp two female pins to that need to go between pin 4 and pin 11 on the rib connector. {| class="wikitable" |+ !RJ45 Jack Color !DB25 !Signal |- |Green |1 |Ground |- |Orange |15 |BUS+ |- |White |12 |A+ |- |Black |25 |Boot Control |}")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

This cable will require you to have a RJ45 to DB25 female adapter as pictured below:

You can find these on ebay by searching for DB25 RJ45.

You will also need a short piece of 24 gauge wire to crimp two female pins to that need to go between pin 4 and pin 11 on the rib connector.

RJ45 Jack Color DB25 Signal
Green 1 Ground
Orange 15 BUS+
White 12 A+
Black 25 Boot Control
Retrieved from "https://ke7hhr.org/index.php?title=CDM_750/1250/1550_Maxtrac_ETC&oldid=28"